residential-water-heater

How Long Does it Take to Drain a Water Heater?

Some chores are time-consuming, and it’s better to prepare yourself beforehand. 

If you’re fixing a schedule and wondering ‘how long does it take to drain a water heater?’, there’s some good news — it’s quicker than you might think. 

A water heater is an essential appliance in any household, providing hot water for showers, dishwashing, and laundry. 

Especially considering its critical value, it’s important to maintain your water heater regularly to ensure it continues functioning correctly. One of the essential maintenance tasks for a water heater is to drain and flush it periodically. In this article, we’ll answer some common questions about draining and flushing a water heater, including how long it takes and how often it should be done.

How Long Does it Take to Drain a Water Heater? — An Expert Guide

Draining a water heater involves removing all the water from the tank to flush out any sediment that has built up. 

There are minor factors like gravity and fluid dynamics that affect it, but once you know how long 10 gallons requires, you can easily pencil in the rest. The time required to drain a water heater depends on the size of the tank and the rate at which water flows out of the drain valve. 

How Long Does It Take To Drain a 40-Gallon Water Heater?

On average, it takes about 30-45 minutes to drain a 40-gallon water heater. The overall time is heavily influenced by the size of the unit.

How Long Does It Take To Drain a 50-Gallon Water Heater?

It generally takes 45-60 minutes to drain a 50-gallon water heater. However, it’s important to note that these are just estimates and that the time to drain a water heater can vary. You can ask the Clover Contracting team for specifics on your model.

Fun Fact From the Experts About Flushing and Draining Your Water Heater

Did you know that draining and flushing your water heater is also known as “burping” your water heater? This term is commonly used by plumbers and DIY enthusiasts alike to describe the process of releasing the built-up sediment and air bubbles from the tank.

How Long Does it Take to Flush a Water Heater on Average?

Flushing a water heater is like draining it, but it involves adding water to the tank to stir up any sediment and then draining it out. The time to flush a water heater depends on the size of the tank and the rate at which water flows out of the drain valve. 

On average, it takes about one or two hours to flush a water heater, depending on the size of the tank and the amount of sediment that needs to be removed.

To flush a water heater, follow these steps:

  • Shut down the power or gas supply that connects to the unit.
  • Turn off the cold water supply valve to the unit.
  • Connect a hose to the drain valve on the unit and run the other portion to a floor drain or outside.
  • Open the drain valve and allow the water to flow out until it runs clear.
  • Turn off the drain valve and remove the hose.
  • Turn on the cold supply valve and allow the water to fill the tank.
  • Once the tank is full, turn on the hot water taps in your home to allow the water to flow and flush out any leftover sediment.
  • Wait for the water to run clear, then turn off the hot water taps.
  • Turn off the cold water supply valve to the unit.
  • Connect the garden hose back to the drain valve and run the other end to a floor drain or outside.
  • Open the drain valve and allow the water to flow out until it runs clear.
  • Turn off the drain valve and remove the hose.
  • Turn on the cold water supply valve to the unit.
  • Once the tank is full, turn on the power or gas supply to the unit.

How Often Should You Drain and Flush Your Water Heater?

Now that you know the answer to the question, “how long does it take to drain water heater units?”, it’s time to assess how often you should tackle the task.

The frequency with which you should drain and flush your water heater depends on several factors, such as the hardness of your water and the size of your household. It’s recommended to drain and flush your water heater at least once a year to prevent sediment buildup and prolong the lifespan of the appliance.

Areas that have hard water often mean that users must drain and flush the unit more frequently. Hard water contains high levels of minerals like calcium and magnesium, which can accumulate in the tank and reduce its efficiency. If you notice signs of hard water, such as a white buildup around your faucets and appliances, it’s a good idea to schedule more frequent water heater maintenance.

If you have a large household or use a lot of hot water, you may need to drain and flush your water heater more often. The more hot water you use, the more quickly sediment can build up in the tank. If you’re unsure how often to drain and flush your water heater, consult with a professional plumber or refer to the manufacturer’s recommendations.

How Long Does it Take to Drain a Water Heater? — Final Thoughts

Draining and flushing your water heater is an essential maintenance task that can prolong the lifespan of your appliance and ensure it continues to function efficiently. While it can be a time-consuming process, it’s relatively straightforward and can be done with basic tools and equipment. 

That means when you call our experts, not only can you be sure it’s done right, but you can be certain that all the right tools are easily on hand to complete the task. 

Plus, straightforward tasks are affordable and can save you big down the road. By following the steps outlined in this article and scheduling regular maintenance, you can help prevent costly repairs and replacements and enjoy reliable hot water for years to come.

Related Posts

Scroll to Top
Subscribe to our email list for promotions and updates.
$100 OFF Air Purification